PP-R Pipe Fitting For Connect Union II
Production Description
● Easy and reliable installation: using homogeneous hot melt connection, a joint connection can be completed in a short time,
● Easy and time-saving installation.
● Insulation and energy saving: the thermal conductivity is 0.24W/mK, which is only 1/200 of the metal tube for heat
● Heat loss in water pipes is minimal.
● Light weight and high specific strength: the specific gravity is about one-eighth of the steel pipe, and the pressure resistance test strength is high.
● Good toughness and good impact resistance.
● The inner and outer walls of the product are smooth, the flow resistance is small, and the energy consumption of the conveying fluid system is low.
● High heat resistance: The long-term normal operating temperature of the conveyed water is 70 °C, and the short-term use is resistant to high temperature
● up to 95°C.
● Corrosion-resistant and non-scaling: It can avoid the fouling and blockage of pipes and the macular rust of water basins and bathtubs. 8 Long service life: The normal service life can reach more than 50 years.
● Preferred material. The weight is only one-ninth of the steel pipe and one-tenth of the copper pipe, which can greatly reduce the construction difficulty of workers.
● Pressure and temperature resistance, produced by imported equipment from Germany, with uniform wall thickness, strong pressure resistance, good heat resistance, and good thermal insulation performance.
●Low resistance. The smooth pipe wall makes the friction along the route less than that of metal pipes.
●The connection is firm, and it has good hot-melt performance. It can connect pipes and fittings of the same material into a whole, eliminating the hidden danger of water leakage.
●Hygienic and environmental protection. Made of non-toxic and environmentally friendly PP-R material, it does not pollute the environment during use, and the waste can be recycled repeatedly.
Application Area
●Hot and cold water piping system.
●Heating system Including floor, wall heating and radiant heating system.
●Pure water piping system.
●Central (centralized) air conditioning system.
Product Specifications
External diameter |
Public wall thickness |
DN15 |
10mm |
DN20 |
15mm |
DN25 |
20mm |
DN32 |
25mm |
DN40 |
32mm |
DN50 |
40mm |
DN65 |
50mm |
DN80 |
65mm |
DN100 |
80mm |
DN125 |
100mm |
DN150 |
100mm |
DN200 |
150mm |
DN250 |
200mm |
DN300 |
250mm |
DN350 |
300mm |
DN400 |
337mm |